CustomTech Flooring Prep
CustomTech – the industry’s leading collection of technologically-superior, easy-to-use, professional grade subfloor preparation products designed for all types of floor coverings.
Quality begins from the ground up.
Preparing your surface is the most critical task of any tile or stone installation. Custom Building Products offers you one source for the needs of virtually any job.
The foundation of precise tile and stone setting.
Whatever the application, CUSTOM? offers the broadest line of tile and stone setting materials in the industry to give the exact performance your job demands.
Tile grout with dependable performance and color.
Look for tile grout with rock-solid durability, consistency and the largest color palette with Custom. Our grouts are easy to work with yet deliver hard, dense joints.
Care & Maintenance
Stains can RUIN Stone & Tile.Protect Yours Now!
Stains on stone, tile or grout happen easily - and can leave permanent stains. Protect your surface against both oil-based and water-based stains with the right sealer.
Professional Solutions for Professional Results
Offering the largest selection of Sealers, Cleaners, Problem Solvers, Grout Colorant and Stone Restoration products, we provide professionals with the right tools and solutions; making us the #1 Contractor Preferred Manufacturer of Sealers and Cleaners.
Tools & Accessories
Precision demands the best.
SuperiorBilt? Tools are professionally preferred for tile, stone and floor covering installations.
Products : Care & Maintenance : Sealers : TileLab® SurfaceGard® Sealer
Provides unsurpassed invisible protection for marble, stone, porcelain, quarry and Saltillo tile, grout, concrete and masonry. This long-lasting, water-based sealer actually repels dirt, oil and stains allowing for easy cleanup. Use when maximum protection is required such as in food preparation areas, floors and other high traffic areas. Can also be used in place of a grout release prior to grouting to prevent grout staining and facilitate grout cleanup. Low odor, pH neutral and nonabrasive. Allows moisture vapor transmission. For interior and exterior use.
As a sealer or grout release for all stone surfaces,?unglazed tile, porcelain, clay pavers, concrete, brick,?masonry, grout. For interior and exterior use.
Surface should be dry, clean and free of waxes, sealers or finishes. TileLab? Heavy-Duty Stripper & Cleaner or Aqua Mix? Heavy-Duty Tile & Grout Cleaner will clean the surface or strip wax and acrylic finishes. New installations need to be cured 48 – 72 hours before application. Protect painted surfaces. Test product in obscure area to ensure desirable results. Sealer can be applied 48 hours after grout has been installed.
MAY BE HARMFUL IF SWALLOWED. MAY IRRITATE EYES AND SKIN. Wear skin and eye protection. Contains diethylene glycol monobutyl ether and fluorophosphate esters. If in eyes, flush with water for at least 15 minutes. If on skin, wash with soap and water. If irritation persists, seek medical attention. If swallowed, DO NOT induce vomiting. Seek medical attention. Keep out of reach of children.
Porous tile, such as clay and Saltillo pavers, can be stained by grout during installation. Sealing the tile before grouting will make grout removal much easier. Apply two coats of sealer according to directions after tile has been bonded for a minimum of 24 hours, or apply to front face of tile before installation.
USE CHEMICAL-RESISTANT GLOVES, such as nitrile, when handling product.
Apply SurfaceGard? using a new mop, lambswool?applicator, sponge or brush. Allow it to penetrate for?up to 5 minutes. Immediately wipe off any excess. If?first coat has been absorbed, apply a second coat?following the same procedure. Polished or dense?surfaces usually require one coat. Grout and other?porous surfaces usually require two. Conduct a test?to see if surface is completely sealed after 2 hours by?applying drops of water on the surface. If it penetrates?immediately, apply an additional coat. If a residue?is visible on the surface after drying, remove it?with a sponge or white polishing pad 60 minutes?after application.
2 - 3 hours.
Clean tools and hands with soap and water immediately after use.
Do not use cleaners containing ammonia, acids or bleach. Use an appropriate TileLab? or Aqua Mix? neutral cleaner. Tile industry experts recommend periodic testing of sealed surfaces. Apply a few drops of water on the surface. If it soaks in, a coat of TileLab? or Aqua Mix? sealer will be necessary to keep sealer at peak performance.
Lasts up to 20 years under normal conditions depending on hardness and texture of surface. Use factors, cleaning routines, harsh cleaning methods, sun exposure and weather conditions will affect wear.
Obtain the applicable LIMITED PRODUCT WARRANTY at www.ndianzq.com/product-warranty or send a written request to Custom Building Products, Inc., Five Concourse Parkway, Atlanta, GA 30328, USA. Manufactured under the authority of Custom Building?Products,?Inc.???2017?Quikrete?International,?Inc.
CUSTOM BUILDING PRODUCTS
Mailing Address Custom Building Products 7711 Center Ave. Ste 500 Huntington Beach, CA 92647
? 2020?Custom Building Products. All Rights Reserved. Privacy